Balboa-water-group VGB 2008 256 GPM Suction Flow Manuel d'utilisateur télécharger pdf

256 GPM Suction Flow Installation Instructions

Packaging and Installation Instructions - SAVE INSTRUCTIONS

For multiple drain use only in self-contained factory manufactured spas.1.

Do not try to locate suction outlets on seating areas or on the brackets for such seating areas. 2.

When two or more suction ﬁttings are used on a common suction line they shall be separated by a minimum of 3 ft. (91.44 cm); 3.

or, if any are located closer, they shall be located on two different planes (i.e., one each on two separate vertical walls).

Conﬁrm with local and national codes and standards for proper installation.

In the event of one suction outlet being completely blocked, the remaining suction outlets serving that system shall have a ﬂow 4.

rating capable of the full ﬂow of the pump(s) for the speciﬁc suction system.

Maximum ﬂow rating with head loss curve: 256 GPM with vacuum tube. 5.

Acceptable connecting pipe size(s) - maximum 2.5” dia. 6.

Mounting position: wall only 7.

Suction outlet part number 30240-U applicable. 8.

Part numbers for 256 GPM conﬁguration: (Replace within seven installed years) 9.

30240U-XX VGB 2008 256 / 179 GPM suction cover & Screw/UV

30341 VGB 2008 256GPM Buttress suction wall ﬁtting x custom slip

30167-V 2” SPG x Custom SPG x 3/4” smooth barb vacuum tube adapter

30169-V 2.5” SPG x Custom SPG x 3/4” smooth barb vacuum tube adapter

30234-V Suction L gasket use 3.75” hole size

30236-V Suction ﬂat gasket use 3.63” hole saw

30239-V Suction nut

30238-V Compensating ring

63414 3/4” ID x 1” OD Tubing 8ft long

Tools required: Philips screw driver, glue for plumbing connections, clamp & pliers for tubing connections. 10.

Service and winterizing instructions. 11.

a. Service - remove screw. Remove cover. Place suction cover on wall ﬁtting with blank portion, no holes pointed down.

The keyway on inside cover must match the notch on the wall ﬁtting. Insert stainless steel screw in cover and tighten

securely. Do not overtighten (as plastic will strip).

b. Winterizing - Drain suction line thoroughly and blow out all remaining water. See spa manufacturer instructions

for winterizing.

WARNING: Do not exceed the maximum allowable ﬂow rate stated on the suction ﬁtting. 12.

The suction ﬁtting including fasteners should be observed for damage or tampering before each use of this facility. 13.

Note: Missing, broken, or cracked suction ﬁttings shall be replaced before using this facility. Loose suction ﬁttings shall be

reattached or replaced before using this facility. Read, then keep these instructions for future reference.

Caution: Be aware that changing pump types and sizes can increase ﬂow rate. The maximum ﬂow rate is 256

GPM with vacuum tube.

Instructions

42137 A May 21, 2012

Patented under U.S. Patent No. 8,191,183.

1 2

Instructions 1

Résumé du contenu

Page 1 - Instructions

256 GPM Suction Flow Installation InstructionsPackaging and Installation Instructions - SAVE INSTRUCTIONSFor multiple drain use only in self-containe

Page 2

Commentaires sur ces manuels

Pas de commentaire

Balboa-water-group VGB 2008 256 GPM Suction Flow Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour l'eau Balboa-water-group VGB 2008 256 GPM Suction Flow. Balboa Water Group VGB 2008 256 GPM Suction Flow User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour l'eau Balboa-water-group VGB 2008 256 GPM Suction Flow